The British Rail Class 318 is an electric multiple unit (EMU) train which operates exclusively in the Strathclyde Partnership for Transport network in West Central Scotland The units were introduced fully on 29 September 1986 as part of the electrification of the Ayrshire Coast Line between Glasgow Central and Ayr /Ardrossan with alternating current (AC) overhead lines Usage was extended to Largs in January 1987. They were also used on the Inverclyde Line in small numbers. The trains currently operate Argyle and North Clyde Line services.
here 318 256 passing Edinburgh going to Doncaster works to get refurbish
Background and history
Effectively a 3-car version of the Class 317 units but used in the Glasgow area, 21 of these British Rail Mark 3-based units were built by BREL York works between 1985-1986, to replace the elderly Class 101 Class 107 Class 120 and Class 126 diesel multiple units (DMUs) which had worked the Glasgow South Western sector for nearly 30 years. The technical description of the units are DTSO+MSO+DTSO, consisting of a central motor car (with a roof mounted Stone Faiveley AMBR pantograph and four Brush TM2141 traction motors located under the floor within both bogies (two motors per a bogie)) with a driving trailer at either end. The units run on the standard 25 kV AC overhead line system, and are standard class throughout, with one toilet located in coach C.
Up to four sets can be worked in multiple to form a 12-car set, although platforms are only capable of handling 8-car trains. The units have a maximum speed of 90 mph (145 km/h), and can complete the 41-mile (66 km) journey between Glasgow Central and Ayr in around 52 minutes. With the introduction of the Class 334s in 2001 - 2002, onto Ayrshire/Inverclyde routes, both the 334s and 318s were found operating them same lines together. The 318 can also be coupled in tandem with the slightly newer Class 320 in a six car formation, this practice is regularly used on the North Clyde and Argyle Lines.
In July 1995, units 318254 and 318262 were operating a Glasgow Central to Largs service when a braking system failure resulted in the train overshooting the end of the platform at Largs railway station The train crashed through shops at the front of the station, and out into Main Street, Largs. Being very early in the morning, there were no serious injuries. The cab of vehicle 77244 (from set 318254) needed to be completely rebuilt. 318262 managed to move by rail back to Shields depot. The reconstruction of the Largs railway station building took almost ten years to complete
Between 2005 and 2007, all Class 318s underwent a conversion process which involves the removal of the corridor connection on the driver's cars. Although one may see this as detrimental to passenger operations, there have been no great problems with the Class 334 or Class 320 units which also have no corridor connections. Apart from 'cleaning up' the appearance of the driver's cars, this allows the driver to have a far more spacious operating environment and gives the driver a better overall view.
Up to four sets can be worked in multiple to form a 12-car set, although platforms are only capable of handling 8-car trains. The units have a maximum speed of 90 mph (145 km/h), and can complete the 41-mile (66 km) journey between Glasgow Central and Ayr in around 52 minutes. With the introduction of the Class 334s in 2001 - 2002, onto Ayrshire/Inverclyde routes, both the 334s and 318s were found operating them same lines together. The 318 can also be coupled in tandem with the slightly newer Class 320 in a six car formation, this practice is regularly used on the North Clyde and Argyle Lines.